USG Sheetrock Fire Code 5/8″ Board 4′ x 12′

USG Sheetrock Fire Code 5/8″ Board 4′ x 12′

Sheetrock® Brand EcoSmart Panels Firecode 30® (UL Type FC30) are lightweight 5/8 in. (15.9 mm) gypsum panels that have been formulated to achieve all of the same strength and physical performance characteristics as standard 5/8 in. (15.9 mm) Sheetrock® Brand Firecode® X Panels at a lower environmental impact and reduced weight. The panels feature an innovative non-combustible gypsum core that is encased in 100% recycled face and back papers that form a high strength-to-weight ratio composite design.

The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and even. The long edges of panels are tapered, allowing joints to be reinforced and concealed with Sheetrock® Brand joint treatment systems. The panels are UL Classified for fire resistance and can be used in any UL Design in which Type FC30 panels are listed. On the face along the long edge of each panel, the UL Type Designation is printed for easy identification by building inspectors.

Add to quote
SKU: USG 06 Category:

Description

Main features:

  • Sustainable and ultralightweight 5/8 in. (15.9 mm) panels for interior wall and ceiling applications
  • Meet Architecture 2030 Challenge for Products
    — Up to 25% less global warming potential (GWP)*
    — Up to 30% less weight reduces transportation fuel energy by up to 20%
  • Living Building Challenge™ Red List Free
  • Contain 100% USDA certified biobased content
  • Up to 97.3% recycled content (regionally available)
  • Achieved GREENGUARD Gold Certification and qualifies as a low VOC emitting material (meets CA 01350)
  • USGBC® LEED® v4—may assist in achieving additional credits
  • Underwriters Laboratories Inc. (UL) Classification as to fire resistance (30-minute and 1-hour fire-rated walls), surface burning characteristics and noncombustibility
  • Comply with ASTM C1396, Standard Specification for Gypsum Board, for 5/8 in. (15.9 mm) andnon-Type X gypsum wallboard
  • Offer comparable strength and sag resistance to standard 5/8 in. (15.9 mm) Type X

* Compared to standard 5/8 in. (15.9 mm) Type X gypsum panels as presented in the Gypsum Association’s 5/8 in. (15.9 mm) Type X Conventional Gypsum Board Environmental Product Declaration (EPD 10270).

Additional information

Board Thickness

5/8"

Documents

Installation guide

Data sheet

Related products